Take a look at five of the most frequent air conditioning issues and how to diagnose them. Let’s know how to fix your AC in some circumstances without needing expert support.
Seasons vary, signaling the coming of colder or warmer weather and an unpredictable period.
There may be months when the air conditioning is not utilized in locations with well-defined seasons, so it is recommended to check that it is working correctly and as planned. After all, if you have purchased the best 5-star AC, you would want to keep it working well for a long time.
Although you have no control over whether it will be sunny, wet, or snowy, there is one thing you can do to prepare your home for the next season. Take a look at the most prevalent air conditioning issues.
We’ll look at five of the most frequent air conditioning issues, how to diagnose them, and how to remedy them. We explain how to fix them in some circumstances without the need for expert support.
You Can Check and Repair Common Air Conditioning Issues
Check if the air conditioner filters need to be cleaned.
It’s the most prevalent problem, and it impacts your air conditioner’s effectiveness in various ways. Still, it’s also one of the easiest to check and fix yourself.
The following are some of the implications of a clogged filter:
- As the filter collects more dust and particles, it becomes more difficult for the air to pass through, diminishing the airflow’s power.
- When the air conditioner is in use, the poor airflow might cause hot and cold spots in the room because the set air temperature cannot reach all corners.
- Dust and other particles that settle on the filter might provide a musty stench in the space where it runs.
- When an air conditioning unit’s filter becomes clogged, it has to work harder to function correctly, which can cause it to overheat.
- Because the filter needs to work harder, the energy used by the unit increases by up to 15%.
Fortunately, all of this may be avoided by regularly inspecting and repairing the filter in your unit. For example, it’s simple to accomplish with a Hitachi Cooling & Heating residential wall-mounted unit. It can assist in maintaining performance while reducing the danger of increasing energy use.
- Make sure the device is turned off.
- Grasp both sides of the front panel and slowly open it by swinging it up.
- Remove the filters by drawing them away from the unit and towards you.
- Filters should be washed in room temperature water. The use of any detergent may cause the filters to deteriorate.
- Place the filters in a shaded area of the house to dry. They may shrink if exposed to the sun or severe heat. To avoid mold or fungal problems, make sure the filters are fully dry.
- When the filters are dry, carefully put them into position and seal the front panel, making the “FRONT” mark facing the front.
- It will be ready to use when you turn the unit on again.
Have you chosen the proper temperature settings?
Although it may be a straightforward task, incorrect temperature settings might cause cooling and heating to cease. This can happen when the air conditioner mode is not changed from heating to cooling (or vice versa) to meet the temperature change.
If the temperature is still not what you want after checking the temperature settings, ensure sure the thermostat is not in direct sunlight. This can result in inflated temperature readings and the air conditioner ineffectively heating the space in which it is utilized.
If you find that temperatures fluctuate and the air conditioning switches on and off owing to changing external circumstances as the seasons change, opt for ventilation to keep the house cooler.
The air conditioner isn’t switching on.
Can you examine your power supply depending on the type of system you have at home and how it was installed? Check the breaker box to verify whether the system has tripped before contacting for service. If the system exhibits no signs of activity and will not switch on.
An air conditioner can trip for various causes, including operating stress induced by filthy filters. If this happens, one of the first things to do is check the breaker box and switch the breaker off and on.
It’s worth thinking about whether new electrical products have been installed since the air conditioner was last used and whether this strains your home’s energy usage.
If the problem persists, turn off the air conditioner at the power source and schedule an inspection before turning it back on.
Furniture causes poor air circulation in the room.
This is especially true in homes with ducted air conditioning systems, so ensure sure the vents (both return and supply) are clear of any furniture or objects. According to the Pacific Gas and Electric Company, it’s worth investigating because clogged vents use up to 25% more energy to distribute air.
When large items of furniture (sofas, cabinets, carpets, and drapes) are placed over vents, the air in your home cannot circulate properly and becomes trapped in the spaces between the vent and the object, wasting energy.
To avoid difficulties, provide at least 10 inches between the vent and any bulky things; this also applies to wall-mounted air conditioning systems, where tall furniture can have the same effect on the air being vented.
When shifting furniture, keep the placement of the vents in mind and make sure there isn’t any furniture in the way or enough space for air to circulate.
Outdoor unit inspection and cleaning
For others, inspecting the outdoor unit may simply entail going to their yard or driveway and ensuring that the unit is not covered or blocked by plant matter or debris. If you reside in an apartment or a high-rise structure, your outdoor unit may be on a balcony, rooftop, or even mounted on the wall. You must contact a specialist to inspect the situation in these situations.
Inadequate cooling inside the house is one of the symptoms that your outside unit requires cleaning. Like interior unit filters, outdoor units can accumulate dust, grime, and debris, affecting the desired indoor temperature. If your outdoor unit is accessible and at ground level, you can check for dirt in the system yourself. You can clear the accumulation surrounding the case if it’s causing the issue. However, if your outdoor unit is attached to the building’s side, it’s time to call in the pros and let them handle it.
Keep visiting The Ganga Times for such interesting articles and news. Follow us on Facebook, Twitter, and Instagram for regular updates.